The BIA-IPRESSPRO is a pump controller and rainwater/mains changeover kit suitable for a range of pumps. The IPRESSPRO combines a 300 kPa high pressure BIA-RAINSAVERMK6-300 and a BIA-IPRESS preset to 320 kPa start for high performance RAINSAVER systems. The BIA-IPRESSPRO can be fitted to pumps up to 2.2 kW, pressures to 9.8 bar and flows to 120 l/m. 

Features

• Start/stop the pump automatically when the tap is open or closed
• Maintain a constant pressure resulting in a reliable water supply
• Automatically stops the pump in the situation of no flow and will resume normal operation once the blockage is removed
• Automatically restarts normal operation in the event of power being cut off to the control
• Controller is able to keep the pump running at flows as low as 0.5L/min to maintain water supply
• Plug and play leads (IEC type) installed on the controller
• Change between Mode 1 (Change Cut In pressure only) and Mode 2 (Change Cut In and cut out) via a single button push
• Real time indication of system pressure displayed so a separate in line pressure gauge is not required
• Special non return valve to avoid water surging